User Guide
Ruby eSATAp ExDrive
(REDESP, REDESPU3)
T E C H N O L O G I E S
Installing your HD to the
Ruby eSATAp ExDrive
Step 1
Separate the top from the bottom cover of
the drive enclosure by loosening the screw.
SATA Connector
HD
Step 2
Align the SATA connector in the
2.5” hard drive with the SATA
connector on the PCB.
Switch
PCB
Shock Absorbers
Step 3
Wrap the shock absorbers around
the hard drive and PCB.
Bottom of PCB
Step 4
Turn over the PCB and secure the hard
drive to the PCB with the mounting
screws that come with the kit.
v3.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
|
3D Innovations Gas Grill C 150 User Manual
ACCO Brands Electric Heater H65 User Manual
Agilent Technologies Webcam 34970 80010 User Manual
Alpine CD Player CDA 7990 User Manual
Amana Microwave Oven RC17 User Manual
American Standard Outdoor Shower 1662602 User Manual
Ativa Speaker System DS 955 User Manual
Axis Communications Home Security System Q7401 User Manual
Behringer Headphones MA400 User Manual
Behringer Musical Instrument Amplifier BT108 User Manual