AEG Refrigerator SCT71900S0 User Manual

SCT71900S0  
FRIDGE-FREEZER  
USER MANUAL  
EN  
 
Contents  
3
CONTENTS  
4 Safety information  
6 Control panel  
9 First use  
10 Daily use  
13 Helpful hints and tips  
14 Care and cleaning  
15 What to do if…  
17 Technical data  
18 Installation  
25 Noises  
27 Environmental concerns  
The following symbols are used in this user  
manual:  
Important information concerning your  
personal safety and information on how to  
avoid damaging the appliance.  
General information and tips  
Environmental information  
Subject to change without notice  
 
4
Safety information  
SAFETY INFORMATION  
In the interest of your safety and to ensure the correct use, before installing and first using  
the appliance, read this user manual carefully, including its hints and warnings. To avoid  
unnecessary mistakes and accidents, it is important to ensure that all people using the ap-  
pliance are thoroughly familiar with its operation and safety features. Save these instruc-  
tions and make sure that they remain with the appliance if it is moved or sold, so that ev-  
eryone using it through its life will be properly informed on appliance use and safety.  
For the safety of life and property keep the precautions of these user's instructions as the  
manufacturer is not responsible for damages caused by omission.  
Children and vulnerable people safety  
• This appliance is not intended for use by persons (including children) with reduced physi-  
cal, sensory or mental capabilities, or lack of experience and knowledge, unless they have  
been given supervision or instruction concerning use of the appliance by a person re-  
sponsible for their safety.  
Children should be supervised to ensure that they do not play with the appliance.  
• Keep all packaging well away from children. There is risk of suffocation.  
• If you are discarding the appliance pull the plug out of the socket, cut the connection  
cable (as close to the appliance as you can) and remove the door to prevent playing chil-  
dren to suffer electric shock or to close themselves into it.  
• If this appliance featuring magnetic door seals is to replace an older appliance having a  
spring lock (latch) on the door or lid, be sure to make that spring lock unusable before  
you discard the old appliance. This will prevent it from becoming a death trap for a child.  
General safety  
WARNING!  
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of  
obstruction.  
• The appliance is intended for keeping foodstuff and/or beverages in a normal household  
as explained in this instruction booklet.  
• Do not use a mechanical device or any artificial means to speed up the thawing process.  
• Do not use other electrical appliances (such as ice cream makers) inside of refrigerating  
appliances, unless they are approved for this purpose by the manufacturer.  
• Do not damage the refrigerant circuit.  
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appli-  
ance, a natural gas with a high level of environmental compatibility, which is neverthe-  
less flammable.  
During transportation and installation of the appliance, be certain that none of the com-  
ponents of the refrigerant circuit become damaged.  
If the refrigerant circuit should become damaged:  
– avoid open flames and sources of ignition  
 
Safety information  
– thoroughly ventilate the room in which the appliance is situated  
5
• It is dangerous to alter the specifications or modify this product in any way. Any damage  
to the cord may cause a short-circuit, fire and/or electric shock.  
WARNING!  
Any electrical component (power cord, plug, compressor) must be replaced by a certified  
service agent or qualified service personnel to avoid hazard.  
1. Power cord must not be lengthened.  
2. Make sure that the power plug is not squashed or damaged by the back of the appli-  
ance. A squashed or damaged power plug may overheat and cause a fire.  
3. Make sure that you can come to the mains plug of the appliance.  
4. Do not pull the mains cable.  
5. If the power plug socket is loose, do not insert the power plug. There is a risk of elec-  
tric shock or fire.  
You must not operate the appliance without the lamp cover1) of interior lighting.  
6.  
• This appliance is heavy. Care should be taken when moving it.  
• Do not remove nor touch items from the freezer compartment if your hands are damp/  
wet, as this could cause skin abrasions or frost/freezer burns.  
• Avoid prolonged exposure of the appliance to direct sunlight.  
Bulb lamps2) used in this appliance are special purpose lamps selected for household ap-  
pliances use only. They are not suitable for household room illumination.  
Daily Use  
• Do not put hot pot on the plastic parts in the appliance.  
• Do not store flammable gas and liquid in the appliance, because they may explode.  
Do not place food products directly against the air outlet on the rear wall.3)  
• Frozen food must not be re-frozen once it has been thawed out.  
• Store pre-packed frozen food in accordance with the frozen food manufacturer's in-  
structions.  
• Appliance's manufacturers storage recommendations should be strictly adhered to. Refer  
to relevant instructions.  
• Do not place carbonated or fizzy drinks in the freezer compartment as it creates pressure  
on the container, which may cause it to explode, resulting in damage to the appliance.  
• Ice lollies can cause frost burns if consumed straight from the appliance.  
Care and cleaning  
• Before maintenance, switch off the appliance and disconnect the mains plug from the  
mains socket.  
• Do not clean the appliance with metal objects.  
• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.  
1) If the lamp cover is foreseen.  
2) If the lamp is foreseen.  
3) If the appliance is Frost Free.  
 
6
Control panel  
• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean  
the drain. If the drain is blocked, water will collect in the bottom of the appliance.  
Installation  
For electrical connection carefully follow the instructions given in specific paragraphs.  
• Unpack the appliance and check if there are damages on it. Do not connect the appli-  
ance if it is damaged. Report possible damages immediately to the place you bought it.  
In that case retain packing.  
• It is advisable to wait at least four hours before connecting the appliance to allow the oil  
to flow back in the compressor.  
• Adequate air circulation should be around the appliance, lacking this leads to overheat-  
ing. To achieve sufficient ventilation follow the instructions relevant to installation.  
• Wherever possible the back of the product should be against a wall to avoid touching or  
catching warm parts (compressor, condenser) to prevent possible burn.  
• The appliance must not be located close to radiators or cookers.  
• Make sure that the mains plug is accessible after the installation of the appliance.  
Connect to potable water supply only. 4)  
Service  
• Any electrical work required to do the servicing of the appliance should be carried out by  
a qualified electrician or competent person.  
• This product must be serviced by an authorized Service Centre, and only genuine spare  
parts must be used.  
Environment Protection  
This appliance does not contain gasses which could damage the ozone layer, in either its  
refrigerant circuit or insulation materials. The appliance shall not be discarded together  
with the urban refuse and rubbish. The insulation foam contains flammable gases: the ap-  
pliance shall be disposed according to the applicable regulations to obtain from your local  
authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchang-  
er. The materials used on this appliance marked by the symbol  
are recyclable.  
CONTROL PANEL  
1
2
3
4
5
6
7
8
9
10  
11  
12 13 14 15 16  
1
Fridge Pilot light  
4) If a water connection is foreseen.  
 
Control panel  
7
2
3
4
5
6
7
8
9
Fridge ON/OFF switch  
Fridge temperature regulator, + button  
Fridge temperature indicator  
Fridge temperature regulator, - button  
DYNAMICAIR indicator  
DYNAMICAIR button  
Appliance Pilot light  
Appliance ON/OFF switch  
10 Freezer temperature regulator, + button  
11 Freezer temperature indicator  
12 Freezer temperature regulator, - button  
13 FROSTMATIC indicator  
14 FROSTMATIC button  
15 Alarm indicator  
16 Alarm reset button  
Switching on  
1. Insert the plug into the mains socket.  
2. Press ON/OFF switch .  
3. The Pilot Light will light up.  
4. The alarm indicator light flashes since the temperature is reached.  
The acoustic alarm sounds.  
5. Press the alarm reset button to reset the alarm.  
Switching off the fridge  
1. Keep ON/OFF switch pressed for more than 5 seconds.  
2. A countdown on the temperature indicator, from -3 -2 -1 will be shown. When “1” ap-  
pears the fridge is turned off. The temperature indicator switches off. The Pilot light  
switches off.  
Switching off the appliance  
1. Keep ON/OFF switch pressed for more than 5 seconds.  
2. A countdown on the temperature indicators, from -3 -2 -1 will be shown. When “1”  
appears the appliance is turned off. The temperature indicators switch off. The Pilot  
lights switch off.  
High temperature alarm  
In the event of an abnormal temperature rise inside the freezer (e.g. power cut) alarm indi-  
cator light will start to flash and a buzzer will sound.  
Push the alarm reset button to stop the buzzer sound, while the alarm indicator light will  
continue to flash.  
The buzzer will stop automatically when the temperature has returned to normal while the  
alarm indicator light will continue to flash.  
 
8
Control panel  
Press the alarm reset button. The alarm indicator light goes out and at the same time the  
freezer temperature indicator show for about 5 seconds the warmest temperature reached  
in the freezer compartment.  
Temperature setting buttons  
The temperature is adjusted using the temperature setting buttons. These buttons are con-  
nected to the temperature indicator.  
• Each time one of the two buttons is pressed again the temperature is adjusted by 1°C.  
The set temperature will be reached within 24 hours.  
Temperature indicators  
The temperature indicators show several information:  
• During normal operation, the temperature currently set for fridge and freezer are dis-  
played.  
• When the temperature is being adjusted a flashing display indicates the fridge/freezer  
temperature currently set .  
Temperature regulation  
To operate the appliance, proceed as follows:  
1. Set the required temperature by pressing the corresponding temperature regulator. The  
temperature indicator will immediately show the changed setting and the temperature  
indicator flashes.  
2. Each time the temperature regulator is pressed the temperature is adjusted by 1 °C. The  
set temperature will be reached within 24 hours.  
3. The temperature indicator will change from flashing to continuous illumination.  
For a correct storage of the food the following temperatures should be set:  
• +5 °C in the fridge  
• -18 °C in the freezer.  
When the setting is changed, the compressor does not start immediately if automatic de-  
frosting is currently taking place. As the storage temperature within the fridge is reached  
quickly you can store food immediately after switching on.  
DYNAMICAIR function  
To switch on the function:  
1. Press the DYNAMICAIR button.  
2. The DYNAMICAIR indicator is shown.  
To switch off the function:  
1. Press the DYNAMICAIR button.  
2. The DYNAMICAIR indicator goes off.  
If the function is activated automatically the DYNAMICAIR indicator is not shown (refer to  
"Daily use").  
The activation of the DYNAMICAIR function increases the energy consumption.  
 
First use  
9
COOLMATIC function  
The COOLMATIC function is suitable for quick cooling of large quantities of goods in the  
refrigerator.  
To activate the function, do these steps:  
1. Press the Fridge Temperature - button (several times if necessary) until the word “SC”  
appears in the display.  
A temperature of +2°C is automatically selected.  
To deactivate the function, do these steps:  
1. Press the Fridge Temperature + button .  
The COOLMATIC function stops automatically after about 6 hours.  
If the COOLMATIC function is switched on the temperature setting may not be changed.  
Holiday function  
This function allows you to keep the refrigerator shut and empty during a long holiday pe-  
riod (e.g. the summer holidays) without the formation of a bad smell.  
The fridge compartment must be empty when the holiday function is on.  
To activate the function:  
1. press continuously the temperature regulator (+ button) until the letter "H" (Holiday)  
appears on the temperature indicator. The Holiday function sets the temperature ap-  
prox +15°C. The refrigerator is in the energy-saving mode.  
To deactivate the function:  
1. set the required temperature by pressing the fridge temperature regulator.  
FROSTMATIC function  
The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, pro-  
tects foodstuffs already stored from undesirable warming.  
To activate the function, do these steps:  
1. Press the FROSTMATIC button.  
2. The FROSTMATIC indicator switches on.  
The FROSTMATIC function is ended automatically after a period of 52 hours.  
You can deactivate the function at any time:  
1. Press the FROSTMATIC button.  
2. The FROSTMATIC indicator switches off.  
FIRST USE  
Cleaning the interior  
Before using the appliance for the first time, wash the interior and all internal accessories  
with lukewarm water and some neutral soap so as to remove the typical smell of a brand-  
new product, then dry thoroughly.  
 
10  
Daily use  
Do not use detergents or abrasive powders, as these will damage the finish.  
DAILY USE  
Freezing fresh food  
The freezer compartment is suitable for freezing fresh food and storing frozen and deep-  
frozen food for a long time.  
To freeze fresh food activate the FROSTMATIC function at least 24 hours before placing the  
food to be frozen in the freezer compartment.  
Place the fresh food to be frozen in the upper compartment.  
The maximum amount of food that can be frozen in 24 hours is specified on the rating  
plate, a label located on the inside of the appliance.  
The freezing process lasts 24 hours: during this period do not add other food to be frozen.  
Storage of frozen food  
When first starting-up or after a period out of use, before putting the products in the com-  
partment let the appliance run at least 2 hours on the higher settings.  
If large quantities of food are to be stored, remove all drawers and baskets from appliance  
and place food on cooling shelves to obtain the best performance.  
WARNING!  
Make sure that foods do not exceed the load limit stated on the side of the upper section  
(where applicable)  
In the event of accidental defrosting, for example due to a power failure, if the power has  
been off for longer that the value shown in the technical characteristics chart under "rising  
time", the defrosted food must be consumed quickly or cooked immediately and then re-  
frozen (after cooling).  
Frozen Food Calendar  
The symbols show different types of frozen goods.  
The numbers indicate storage times in months for the appropriate types of frozen goods.  
Whether the upper or lower value of the indicated storage time is valid depends on the  
quality of the foods and treating before freezing.  
Thawing  
Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compart-  
ment or at room temperature, depending on the time available for this operation.  
Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking  
will take longer.  
 
Daily use  
11  
Ice-cube production  
This appliance is equipped with one or more trays for the production of ice-cubes. Fill these  
trays with water, then put them in the freezer compartment.  
Do not use metallic instruments to remove the trays from the freezer.  
Cold accumulators  
One or more cold accumulators are supplied in the freezer; these increase the length of  
time for which food will keep in the event of a power failure or breakdown.  
Movable shelves  
The walls of the refrigerator are equipped with a  
series of runners so that the shelves can be posi-  
tioned as desired.  
For better use of space, the front half-shelves can  
lie over the rear ones.  
Positioning the door shelves  
To permit storage of food packages of various sizes, the door shelves can be placed at dif-  
ferent heights.  
Positioning the sliding box  
The sliding box can be placed at different heights.  
To make these adjustments proceed as follow:  
 
12  
Daily use  
1. lift the shelf with the sliding box upwards  
and out of the holders in the door  
2. remove the retaining bracket out of the  
guide under the shelf  
3. Reverse the above operation to insert the  
sliding box at a different height.  
MAXIBOX drawer  
The drawer is suitable for storing fruit and vege-  
tables.  
There is a separator inside the drawer that can be  
placed in different positions to allow for the sub-  
division best suited to personal needs.  
There is a grille (if foreseen) on the bottom of the  
drawer to separate the fruit and vegetables from  
any humidity that may form on the bottom sur-  
face.  
All parts inside the drawer can be removed for  
cleaning purposes  
DYNAMICAIR  
The refrigerator compartment is equipped with a  
device that allows for rapid cooling of foods and  
more uniform temperature in the compartment.  
This device activates by itself when needed, for  
example for a quick temperature recovering after  
door opening or when the ambient temperature  
is high.  
Allows you to switch on the device manually  
when needed (refer to "DYNAMICAIR Function").  
The DYNAMICAIR device stops when the door is  
open and restarts immediately after the door  
closing.  
 
Helpful hints and tips  
13  
HELPFUL HINTS AND TIPS  
Hints for energy saving  
• Do not open the door frequently or leave it open longer than absolutely necessary.  
• If the ambient temperature is high and the Temperature Regulator is set to low tempera-  
ture and the appliance is fully loaded, the compressor may run continuously, causing  
frost or ice on the evaporator. If this happens, set the Temperature Regulator toward  
warmer settings to allow automatic defrosting and so a saving in electricity consump-  
tion.  
Hints for fresh food refrigeration  
To obtain the best performance:  
• do not store warm food or evaporating liquids in the refrigerator  
• do cover or wrap the food, particularly if it has a strong flavour  
• position food so that air can circulate freely around it  
Hints for refrigeration  
Useful hints:  
Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegetable  
drawer.  
For safety, store in this way only one or two days at the most.  
Cooked foods, cold dishes, etc..: these should be covered and may be placed on any shelf.  
Fruit and vegetables: these should be thoroughly cleaned and placed in the special draw-  
er(s) provided.  
Butter and cheese: these should be placed in special airtight containers or wrapped in alu-  
minium foil or polythene bags to exclude as much air as possible.  
Milk bottles: these should have a cap and should be stored in the bottle rack on the door.  
Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.  
Hints for freezing  
To help you make the most of the freezing process, here are some important hints:  
• the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating  
plate;  
• the freezing process takes 24 hours. No further food to be frozen should be added during  
this period;  
• only freeze top quality, fresh and thoroughly cleaned, foodstuffs;  
• prepare food in small portions to enable it to be rapidly and completely frozen and to  
make it possible subsequently to thaw only the quantity required;  
• wrap up the food in aluminium foil or polythene and make sure that the packages are  
airtight;  
• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a  
rise in temperature of the latter;  
• lean foods store better and longer than fatty ones; salt reduces the storage life of food;  
 
14  
Care and cleaning  
• water ices, if consumed immediately after removal from the freezer compartment, can  
possibly cause the skin to be freeze burnt;  
• it is advisable to show the freezing in date on each individual pack to enable you to keep  
tab of the storage time.  
Hints for storage of frozen food  
To obtain the best performance from this appliance, you should:  
• make sure that the commercially frozen foodstuffs were adequately stored by the retail-  
er;  
• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the  
shortest possible time;  
• not open the door frequently or leave it open longer than absolutely necessary.  
• Once defrosted, food deteriorates rapidly and cannot be refrozen.  
• Do not exceed the storage period indicated by the food manufacturer.  
CARE AND CLEANING  
CAUTION!  
Unplug the appliance before carrying out any maintenance operation.  
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must  
therefore only be carried out by authorized technicians.  
Periodic cleaning  
The equipment has to be cleaned regularly:  
• clean the inside and accessories with lukewarm water and some neutral soap.  
• regularly check the door seals and wipe clean to ensure they are clean and free from  
debris.  
• rinse and dry thoroughly.  
Do not pull, move or damage any pipes and/or cables inside the cabinet.  
Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes  
to clean the interior as this will damage the surface and leave a strong odour.  
Clean the condenser (black grill) and the compressor at the back of the appliance with a  
brush. This operation will improve the performance of the appliance and save electricity  
consumption.  
Take care of not to damage the cooling system.  
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the  
plastics used in this appliance. For this reason it is recommended that the outer casing of  
this appliance is only cleaned with warm water with a little washing-up liquid added.  
After cleaning, reconnect the equipment to the mains supply.  
 
What to do if…  
15  
Defrosting of the refrigerator  
Frost is automatically eliminated from the evaporator of the refrigerator compartment ev-  
ery time the motor compressor stops, during normal use. The defrost water drains out  
through a trough into a special container at the back of the appliance, over the motor com-  
pressor, where it evaporates.  
It is important to periodically clean the defrost  
water drain hole in the middle of the refrigerator  
compartment channel to prevent the water over-  
flowing and dripping onto the food inside. Use  
the special cleaner provided, which you will find  
already inserted into the drain hole.  
Defrosting of the freezer  
The freezer compartment of this model, on the other hand, is a "no frost" type. This means  
that there is no buildup of frost when it is in operation, neither on the internal walls nor on  
the foods.  
The absence of frost is due to the continuous circulation of cold air inside the compart-  
ment, driven by an automatically controlled fan.  
Periods of non-operation  
When the appliance is not in use for long periods, take the following precautions:  
disconnect the appliance from electricity supply  
• remove all food  
defrost5) and clean the appliance and all accessories  
• leave the door/doors ajar to prevent unpleasant smells.  
If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food  
inside from spoiling in case of a power failure.  
WHAT TO DO IF…  
WARNING!  
Before troubleshooting, disconnect the mains plug from the mains socket.  
Only a qualified electrician or competent person must do the troubleshooting that is not in  
this manual.  
5) If foreseen.  
 
16  
What to do if…  
There are some sounds during normal use (compressor, refrigerant circulation).  
Problem  
Possible cause  
Solution  
The appliance is noisy  
The appliance is not supported  
properly  
Check if the appliance stands sta-  
ble (all the four feet should be on  
the floor)  
The appliance does not  
operate. The lamp does  
not operate.  
The appliance is switched off.  
Switch on the appliance.  
The mains plug is not connected Connect the mains plug to the  
to the mains socket correctly.  
mains socket correctly.  
The appliance has no power.  
Connect a different electrical ap-  
There is no voltage in the mains pliance to the mains socket.  
socket.  
Contact a qualified electrician.  
The lamp does not work.  
The Pilot light flashes.  
The lamp is in stand-by.  
The lamp is defective.  
Close and open the door.  
Refer to "Replacing the lamp".  
Contact a qualified electrician.  
The appliance is not working  
properly.  
The buzzer sounds. The  
Alarm light flashing.  
The temperature in the freezer is Refer to "High Temperature  
too high.  
Alarm".  
The compressor operates  
continually.  
The temperature is not set cor-  
rectly.  
Set a higher temperature.  
The door is not closed correctly. Refer to "Closing the door".  
The door has been opened too  
frequently.  
Do not keep the door open longer  
than necessary.  
The product temperature is too  
high.  
Let the product temperature de-  
crease to room temperature be-  
fore storage.  
The room temperature is too  
high.  
Decrease the room temperature.  
The compressor does not  
start immediately after  
pressing the FROSTMATIC  
or COOLMATIC button, or  
after changing the tem-  
perature.  
This is normal, no error has oc-  
curred.  
The compressor starts after a pe-  
riod of time.  
Water flows on the rear  
plate of the refrigerator.  
During the automatic defrosting This is correct.  
process, frost defrosts on the  
rear plate.  
Water flows into the re-  
frigerator.  
The water outlet is clogged.  
Clean the water outlet.  
Products prevent that water  
flows into the water collector.  
Make sure that products do not  
touch the rear plate.  
 
Technical data  
17  
Problem  
Possible cause  
Solution  
Temperature cannot be  
set .  
FROSTMATIC or COOLMATIC  
functions switched on.  
Switch off FROSTMATIC or COOL-  
MATIC manually, or wait to set  
the temperature until the func-  
tion has reset automatically. Re-  
fer to "FROSTMATIC or COOLMAT-  
IC function"..  
The temperature in the  
The temperature regulator is not Set a higher/lower temperature.  
appliance is too low/high. set correctly.  
The door is not closed correctly. Refer to "Closing the door".  
The product temperature is too  
high.  
Let the product temperature de-  
crease to room temperature be-  
fore storage.  
Many products are stored at the Store less products at the same  
same time. time.  
The temperature in the re- There is no cold air circulation in Make sure that there is cold air  
frigerator is too high.  
the appliance.  
circulation in the appliance.  
The temperature in the  
freezer is too high.  
Products are too near to each  
other.  
Store products so that there is  
cold air circulation.  
Replacing the lamp  
The appliance is equipped with a longlife LED interior light.  
Only service is allowed to replace the lighting device. Contact your Service Center  
Closing the door  
1. Clean the door gaskets.  
2. If necessary, adjust the door. Refer to "Installation".  
3. If necessary, replace the defective door gaskets. Contact the Service Center.  
TECHNICAL DATA  
Dimension of the recess  
Height  
Width  
Depth  
1850 mm  
560 mm  
560 mm  
21 h  
Rising Time  
Voltage  
230-240 V  
50 Hz  
Frequency  
The technical information are situated in the rating plate on the internal left side of the  
appliance and in the energy label.  
 
18  
Installation  
INSTALLATION  
WARNING!  
Read the "Safety Information" carefully for your safety and correct operation of the appli-  
ance before installing the appliance.  
Positioning  
Install this appliance at a location where the ambient temperature corresponds to the cli-  
mate class indicated on the rating plate of the appliance:  
Climate class  
Ambient temperature  
SN  
N
+10°C to + 32°C  
+16°C to + 32°C  
+16°C to + 38°C  
+16°C to + 43°C  
ST  
T
Electrical Connection  
CAUTION!  
Any electrical work required to install this appliance should be carried out by a qualified  
electrician or competent person.  
WARNING!  
This appliance must be earthed.  
The manufacturer declines any liability should these safety measures not be observed.  
1
2
3
5
4
The wires in the mains lead are coloured in accordance with the following code:  
 
Installation  
19  
Green and Yellow:  
Brown:  
Earth  
Live  
1
3
5
Blue:  
Neutral  
As the colours of the wires in the mains lead of this appliance may not correspond with the  
coloured markings identifying the terminals in your plug, proceed as follows:  
1. Connect the wire coloured green and yellow to the terminal marked either with the let-  
ter “E“ or by the earth symbol  
or coloured green and yellow.  
2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or  
coloured black.  
3. Connect the wire coloured brown to the terminal either marked with the “L“ or col-  
oured red.  
4.  
Check that no cut, or stray strands of wire is present and the cord clamp  
over the outer sheath.  
is secure  
4
5. Make sure the electricity supply voltage is the same as that indicated on the appliance  
rating plate.  
6. Switch on the appliance.  
The appliance is supplied with a 13 amp plug fitted  
the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.  
. In the event of having to change  
2
WARNING!  
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it  
is disposed of safely.  
Door reversibility  
The door of the appliance opens to the right. If you want to open the door to the left, do  
these steps before you install the appliance:  
1. Loosen the upper pin and remove the  
spacer.  
2. Remove the upper pin and the upper  
door.  
 
20  
Installation  
3. Unscrew the pins (B) and spacers (C).  
4. Remove the lower door.  
C
B
C
5. Loosen the lower pin.  
On the opposite side:  
1. Install the lower pin.  
2. Install the lower door.  
3. Refit the pins (B) and the spacers (C) on  
the middle hinge on the opposite side.  
4. Install the upper door.  
5. Tighten the spacer and tighten the upper  
pin.  
Ventilation requirements  
The airflow behind the appliance must be suffi-  
cient.  
Installing the appliance  
CAUTION!  
Make sure that the mains cable can move freely.  
Do these steps.  
 
Installation  
21  
1. If necessary cut the adhesive sealing  
strip and then apply it to the appliance  
as shown in figure.  
x
x
2. Drill the hinge cover A, as shown in fig-  
ure.  
Apply the covers A and A1 (in the acces-  
sories bag) in to the middle hinge.  
A
A1  
3. Install the appliance in the niche.  
Push the appliance in the direction of  
the arrow (1) until the upper gap cover  
stops against the kitchen furniture.  
Push the appliance in the direction of  
the arrow (2) against the cupboard on  
the opposite side of the hinge.  
 
22  
Installation  
4. Adjust the appliance in the niche.  
Make sure that the distance between  
the appliance and the cupboard front-  
edge is 44 mm.  
The lower hinge cover (in the accessories  
bag) makes sure that the distance be-  
tween the appliance and the kitchen  
furniture is correct.  
4mm  
44mm  
Make sure that the clearance between  
the appliance and the cupboard is 4  
mm.  
Open the door. Put the lower hinge cov-  
er in position.  
5. Attach the appliance to the niche with 4  
screws.  
I
I
6. Remove the correct part from the hinge  
cover (E). Make sure to remove the part  
DX, in the case of right hinge, SX in op-  
posite case.  
 
Installation  
23  
7. Attach the covers (C, D) to the lugs and  
the hinge holes.  
Install the vent grille (B).  
C
Attach the hinge covers (E) to the hinge.  
D
E
E
B
8. If the appliance must connect laterally  
to the kitchen furniture door:  
a) Slacken the screws in fixing brackets  
(H).  
b) Move the brackets (H).  
c) Retighten the screws.  
H
H
9. Disconnect the parts (Ha), (Hb), (Hc) and  
(Hd)  
 
24  
Installation  
10. Install the part (Ha) on the inner side of  
the kitchen furniture.  
ca. 50 mm  
90°  
90°  
21 mm  
21 mm  
ca. 50 mm  
11. Push the part (Hc) on the part (Ha).  
Ha  
Hc  
12. Open the appliance door and the kitch-  
en furniture door at an angle of 90°.  
8 mm  
Insert the small square (Hb) into guide  
(Ha).  
Put together the appliance door and the  
furniture door and mark the holes.  
Ha  
Hb  
 
Noises  
25  
13. Remove the brackets and mark a dis-  
tance of 8 mm from the outer edge of  
the door where the nail must be fitted  
(K).  
8 mm  
K
Ha  
14. Place the small square on the guide  
again and fix it with the screws sup-  
plied.  
Align the kitchen furniture door and the  
appliance door by adjusting the part Hb.  
Hb  
15. Press the part (Hd) on the part (Hb).  
Do a final check to make sure that:  
• All screws are tightened.  
• The sealing strip is attached tightly to the  
cabinet.  
Hb  
• The door opens and closes correctly.  
Hd  
NOISES  
There are some sounds during normal running (compressor, refrigerant circulation).  
 
26  
Noises  
HISSS!  
BRRR!  
OK  
CLICK!  
CLICK!  
BRRR!  
BRRR!  
BLUBB!  
BLUBB!  
 
Environmental concerns  
27  
HISSS!  
HISSS!  
SSSRRR!  
SSSRRR!  
CRACK!  
CRACK!  
ENVIRONMENTAL CONCERNS  
The symbol on the product or on its packaging indicates that this product may not be  
treated as household waste. Instead it should be taken to the appropriate collection point  
for the recycling of electrical and electronic equipment. By ensuring this product is  
disposed of correctly, you will help prevent potential negative consequences for the  
environment and human health, which could otherwise be caused by inappropriate waste  
handling of this product. For more detailed information about recycling of this product,  
please contact your local council, your household waste disposal service or the shop where  
you purchased the product.  
 
222356012-B-032011  
 

Acnodes Personal Computer PC 8120 User Manual
Addonics Technologies Portable Media Storage ST4ESA User Manual
AEG Refrigerator C 7 18 41 4I User Manual
Aiwa Stereo System XM M25 User Manual
Alliance Laundry Systems Clothes Dryer DRY710C User Manual
Altinex Network Card MT106 103 User Manual
AMX Stereo Receiver UDM RX01 User Manual
AVerMedia Technologies Network Card HC82U User Manual
Behringer DJ Equipment SX4882 User Manual
Beko Refrigerator BK 7671 LD PLUS User Manual